SMT Panasonic CM NPM 12 16mm Feeder KXFW1KSCA00 without sensor for pick and place machine

SMT Panasonic CM NPM 12 16mm Feeder KXFW1KSCA00 without sensor for pick and place machine

PANASONIC BM123 / BM221 / BM231 / MSF Series Feeders:                                            
BM    8W*2P   10896BF101           Double                                              
BM    8W*2P   N610014231AA         Double                                        
BM    8W*4P   10896BF106           Double                                              
BM    8W*4P   N610016060AA         Double                                        
MSF  8W*2P   10896BF061            Double                                     
MSF  8W*4P   10896BF066            Double                                     
BM    8W*2P   10896BF074           Single                                      
BM    8W*4P   10896BF071           Single                                      
BM    12MM    FAE1200MA300                                           
BM    16MM    FAE1600MA300                                           
BM    24MM    FAE2400MA300                                           
BM    32MM    FAE3200MA300                                           
BM    44MM    FAE4400MA300                                           
BM    56MM    FAE5600MA300    

Panasonic CM/NPM/AM SMT Feeders:
4mm         N610117446AB  For 01005
8mm         N610031080AA  For 0201
8mm         KXFW1KS5A00   with sensor
            KXFW1KSBA00   without sensor
12/16mm     KXFW1KS6A00  with sensor
            KXFW1KSCA00  without sensor
24/32mm     KXFW1KS7A00  with sensor
            KXFW1KSDA00  without sensor
            N610004577AA depth21mm
            N610133537AA depth26mm
44/56mm     KXFW1KS8A00   with sensor
            KXFW1KSEA00   without sensor
            KXFW1L0YA00   depth21mm
            N610133539AA  depth26mm
72mm        KXFW1KS9A00    with sensor
            KXFW1KSFA00    without sensor
            KXFW1L0ZA00    depth21mm
88mm         KXFW1L10A00    depth21mm

Feeder performance will degrade without proper maintenance. Regular cleaning, lubrication,and calibration are essential. Feeder neglect will lead to:
1. Mispicking of parts
2. Misplacement of parts
3. “Tombstoning” of parts
4. Flipped parts

Issues related to improper nozzle/feeder maintenance or use of poor quality nozzles are often the SAMSUNGe. Here are some of the most common problems:
1. Poor pickup location on part. It will cause a loss of vacuum and result in parts shifting on the nozzle during transport.
2. Short/worn nozzles result in poor pickup and can cause the part not to be imbedded into the paste. When the part is not placed into the paste correctly there is not enough surface tension to hold the part while the PCB is moving. Parts will shift.